//MCP Analog Digital Trainer Board M21-7000

MCP Analog Digital Trainer Board M21-7000

৳ 26,000.00

Features:

  • High level, high quality digital-analog trainer
  • Combines all essential function of analog and digital experiment
  • With removable breadboard, DC power supply, function generator, two pulse switches, 2 ¼ inch 8 ohm 0.25W speaker and etc.
SKU: M21-7000 Category: Tag:

Product Description

 TWO PULSE SWITCH2pcs pushbuttons contain switches debouncer for eliminating the bounce caused by switch from“open” to “close” or from “close” to “open” position.

SPECIFICATIONS
SOLDER LESS BREADBOARD
 SOLDERLESS BREADBOARD Interconnected with 2820 tie points nickel plated contact,fitted all DIP sizes and all components with lead

and solid wire AWG # 22-30 (0.3-0.8mm).It can be changed and replaced for different purpose and can be

connected with demonstration panel. Therefore, it is very convenient for both teachers and students.

 DC POWER SUPPLY
 A.Fixed DC output  +5V, 1A
B.Fixed DC output  -5V, 1 A.
 C.Variable DC output  0V to +15V, 1 A.
 D.Variable DC output  0V to –15V, 1 A.
POTENTION METERS
 A. Variable resistor VR1  1kΩ
 B. Variable resistor VR2  100kΩ
FUNCTION GENERATOR
 Frequency range 1Hz-10Hz
10Hz-100Hz
100Hz-1kHz
1kHz-10kHz
10kHz-100kHz
 Amplitude Sine wave output:0-10 Vpp variable
Triangle wave output:0-10 Vpp variable
Square wave output:0-10 Vpp variable
TTL mode output:4 Vpp
TWO DIGITS OF 7 SEGMENT LED DISPLAY
TWO PULSE SWITCH
SIXTEEN DATA SWITCHES
 SIXTEEN DATA SWITCHES 16pcs toggle switches and corresponding output point. When switch is set at “down” position, the output is LO level; contrarily, it is to be HI level while setting at “up” position.
SPEAKER
 SPEAKER  2-1/2 inch diameter, 8 ohm/0.5W to be used for load.
FOUR CHANNEL ADAPTER
 FOUR CHANNEL ADAPTER  Both of the two banana sockets’ and two BNC jacks’ point tips are changeable. It is suitable for M21-7000 to be connected with peripherals.
SIXTEEN BITS LED DISPLAY
 SIXTEEN BITS LED DISPLAY  16 red LED’s separate input terminals. The LED will be lighted up when input is at “HI level” ,and it will be turned off when it is at no input or at “LO level”.
UNIVERSAL CONNECTOR FIXED HOLDER
  It reserves universal connector fixed holder on the panel in order to be connected with various universal connectors, which are available (1) Straight header 60 pin

(2) Card edge connector 2.54mm 62pin

(3) D sub25 pin connector, male & female

(4) Card edge connector 3.96mm 56pin

(5) Dip sockets connector 28 pin & 40 pin

 OTHER STANDARD ACCESSORIES  (1) Power cord
(2) Pin : 10pcs
(3).User manual
 DIMENSIONS & WEIGHT  258 x 95 x 334mm(WxHxD)
Approx 4.5kg

Reviews

There are no reviews yet.

Be the first to review “MCP Analog Digital Trainer Board M21-7000”